Hotel / Restaurant
Conversion / Restoration
The old façade base coat was removed down to the quarry-stone wall, then completely rebuilt as follows (including allowing for appropriate drying times): Fixit 493 Mineral-based Undercoat Stabilizer was first sprayed onto the quarry-stone wall, then a 6 – 8 cm thick layer of Fixit 222 High Performance Insulating Render applied with reinforcing mesh, attached with Fixit 223 Special Embedding Mortar, embedded over the whole surface. Fixit 475 Primer for Mineral-Based Final Rendering was applied as an undercoat over the entire façade. The large white areas were covered twice with 0.5mm coats of Fixit 777 Fine Extra White Render. The smaller grey areas were covered with a mixture of Fixit 205 (base coat with hydraulic lime) and 208 (basic mixture for restauration work) to create a Tyrolean render. This was applied with a hand-operated plaster spreader/flicker. Finally the façade was given two coats of mineral-based paint.
Basic mixture for restoration work
Aerogel High Performance Insulating Plaster
Special Embedding Mortar
Roughcast mortar with adhesive agent
Primer for mineral-based final renderings
HTS Architekten + Partner AG, 6460 Altdorf
GB Gipsbau AG, 6060 Sarnen
Gamma AG Immobilien, 6467 Schattdorf
Renovation of the building with a 30 – 60 mm thick layer of Fixit 222 Aerogel High Performance Insulating Plaster. Fixit 203 mineral-based finish coat followed by water-vapour permeable, hydrophobic, mineral-based Fixit 784 Silicate plaster roll-on paint.