1

Fixit 763
Lime cement render

Fixit 763
  • Mineral-based and biocide-free
  • Diverse structures possible
  • Historically important plaster patterns
Item no.Packaging typeConsumption/abundanceDashedkg/unitunit/Pal.Granulation
2000578327 Bag approx. 2 kg/m² Full abrasion 25 kg/unit 40 unit/Pal. 1 mm
2000578328 Bag approx. 2,4 kg/m² Full abrasion 25 kg/unit 40 unit/Pal. 1,5 mm
2000578329 Bag approx. 2,7 kg/m² Full abrasion 25 kg/unit 40 unit/Pal. 2 mm
2000578330 Bag approx. 5 kg/m² Full abrasion 25 kg/unit 40 unit/Pal. 3-4 mm
2000578331 Bag approx. 6,5 kg/m² Full abrasion 25 kg/unit 40 unit/Pal. 5-6 mm

What information regarding this product are you interested in?

Add to bookmarks Remove from bookmarks

Technical documents

TDS Fixit 763 Lime cement render en

Technical data sheet

pdf
742 KB
Add to bookmarks Remove from bookmarks
Download
MSDS Fixit 763 Lime cement render en

Safety data sheet

pdf
419 KB
Add to bookmarks Remove from bookmarks
Download

Benefits of this product

Benefits of this product

Mineral-based and biocide-free

Diverse structures possible

Historically important plaster patterns

On cement and limestone substrates

Range of grain sizes

Product description

Fixit 763

This white limestone-cement render is a final coat for brushing onto cement and limestone bound substrates in outdoor areas. It is suitable for use on historically valuable plaster surfaces.

The substrate must be clean, dry and of adequate load-bearing capacity. Prior treatment with Fixit 475 Primer for mineral-based final renderings is recommended.

Material base

  • Binder: white lime, portland cement
  • Aggregates: limestone sands
  • Additives: Water retention agents, air entraining agents

Processing information

Outside / walls
Use at a temperature between + 5 °C and + 30 °C
Dilute with water
Apply with a trowel
Finish with a trowel
Protect from sun and rain
Storage 6 months, protect from the weather
Observe the information on the technical card

Application examples

Energy efficient renovation, Dübendorf

Energy efficient renovation, Dübendorf

Renovation of external façade: existing base and finish coats removed. Reconstruction with Fixit 211 rough cast mortar, Fixit 222 Aerogel High Performance Insulating Plaster, mesh embedding in Fixit 223, Fixit 493 Mineral-based undercoat stabilizer, finish coat Fixit 763 white lime masonry mortar with Fixit 497 mortar emulsion.

Read more
Residential buildings Hochstrasse Zurich

Residential buildings Hochstrasse Zurich

The ABZ cooperative apartment buildings on Hochstrasse in Zurich Fluntern, built by Otto Streicher in 1926, were last extensively renovated in the mid-1970s. The aim was to preserve the external appearance and the internal spatial structure in their essence. Therefore, it was decided to apply an aerogel high-performance insulation plaster Fixit 222 to the façades, while retaining the existing jambs. Foto: Markus Frietsch

Read more
Are you interested in a product or do you need consulting?

Are you interested in a product or do you need consulting?

Contact us! We will get back to you with advice.

We stand for:

Coordinated logistics

Excellent quality

Individual consulting

Contact form